Designed for rugged environments, the shock resistant skin protects a 3.1 inch (8cm) colour screen and has easy-to-feel raised buttons. The intrinsically safe dual-element, 4MHz transducer is adjustable up to 8Hz with accuracy of +/- 0.05mm (0.01inch).
Using the UT5000 you can pick up reduction in metal
thickness using its unique MultiECHO™ technology or even uncover pitting
in a pipeline using Corrosion mode; making use of constant-real time
measurements giving maximum, minimum and average values. When using
MultiECHO™; four readings are required before the UT5000 displays a
value.
With MultiECHO™ an inspector can be
confident that the reading stored is accurate and unaffected by couplant
or surface interference.
UT5000 is also supported by CorDEX
CONNECT™ software, designed to download the stored information from the
device, allowing the user to create historical trend graphs and reports
from the data collected. The software also gives you the ability to
associate photos taken with your hazardous area camera to help visually
aid any reports that you may create.
- • Operates with 13.54MHz passive tags
- • Detection range up to 5cm (1.9in)
- • Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formats
- • Lithium thionyl chloride primary 3.6V cell
- • 100 hours continuous operation with back light restrictions
- • Low battery warning
Product Specifications
ATEX Certificate No. Baseefa11ATEX0114
IECEx Certificate No. IECEx BAS 11.0094
Memory Stores up to 1000 measurements
Screen 8cm (3.1inch) RGB TFT colour screen with backlight Right/left handed set up
Material Velocity Selection Preloaded via Drop-Down menu, or user defined.
Transducer Dual Element
Pulse Rate Standard transmit pulse rate of 4Hz Adjustable from single shot up to 8Hz
Receiver Bandwidth 1MHz to 15MHz (-3dB points)
Frequency 4MHz, 3mm up to 100mm (0.01in to 3.9in)
Accuracy +/- 0.05mm (0.01in)
RFID Tag Reader:
Battery Details
Operating Temperature -10 to +50C (14 ̊F to 122 ̊F)
Weight 1.1Kg (2.4lb)
Posting Komentar