With the Fluke 771 you no longer need to lift a wire from a terminal (break the loop) to measure 4-20 mA which has a direct impact on your maintenance time. With the Fluke 771 there is no need to call a control room to override the control of a process loop when breaking the loop and you save time when testing analog I/O on a PLC if you do not need to check measurements on a console. In addition, the Fluke 771 can have another impact on your overall cost by eliminating catastrophic plant outage caused by accidentally opening a critical loop.
Features:
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
Specification:
| Environmental Specifications | |
| Diameter of measurable conductor | 0.177” or 4.5 mm max |
| Operating temperature | -10 to 50 ºC |
| Storage Temperature | -25 to 60ºC |
| Operating Humidity | < 90% @ <30 ºC, < 75% @ 30 to 55ºC |
| Operating Altitude | 0 to 2000 m |
| IP Rating | IP 40 |
| Size | 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.) |
| Weight | 260G, (9.1 oz.) |
| Vibration | Random 2 g, 5 to 500 Hz |
| Shock | 1 meter drop test (except the jaw) |
| EMI/RFI | Meets EN61326-1 |
| Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m. | |
| Temperature Coefficient | 0.01% ºC |
| (<18℃ or > 28℃) | |
| Power, battery life | 771: (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical |
| Warranty | Three years for electronics |
| one year for cable and clamp assembly | |
| mA measurement (Measured by clamp) | |
| Resolution and Range: | 0 to 20.99 mA |
| Accuracy: | 0.2% +2 counts |
| Resolution and Range: | 21.0 mA to 100.0 mA |
| Accuracy: | 1% + 5 counts |
Tidak ada komentar:
Posting Komentar