- In accordance with ISO 2934, used for periodic measurement, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
- Speciality designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning and predictive maintence purpose.
- Individual high quality accelerometer for accurate and repeatable measurements.
- Bearing conditions monitoring function.
- LCD digital display.
- Lightweight and easy to use.
- Wide frequency range (10Hz to 10KHz) in acceleration mode.
- AC output socket for headphones and recording.
- Optional headphones for use as electronic stethoscope.
- Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface.
Specification
Display : 4 digits, 18 mm LCD, Measured values and makers ( units, 10, and battery symbol)
Transducer : Piezoelectric accelerometer.
Parameters measured : Velocity, Acceleration, Displacement RPM and Frequency.
Measuring range :
Velocity :
0.01 - 40.00cm/s true RMS
0.000 - 16.00inch/s
Acceleration :
0.1 - 400.0m/s equivalent peak
0.3 - 1312ft/s
Displacement :
0.001 - 4.000mm
0.04 - 160.0mil, equivalent pk - pk
RPM (r/min) :
- 60 - 99.990r/min
Frequency : 1 - 20kHz.
Frequency range for measuring
Acceleration :
- 10Hz to 10kHz in ‘1’ mode.
- 10Hz to 10kHz in ‘10’ mode for bearing condition check.
Displacement : 10Hz to 1kHz.
Accuracy : ±5% ±2digits.
Metric/Imperial conversion.
PC interface : RS232C.
Output : AC output 2.0V peak full scale (load resistance above 10k).
Power supply : 4 x 1.5AAA size (UM-4) batteries.
Power off : 2 modes, Manual off at any time.
Operating conditions :
- Temperature : 0° - 50°C.
- Humidity : below 90% RH.
Weight : 120g (not including batteries).
Posting Komentar