* Measuring sample : no lighting sample ( textiles, paper, leathers... ).
* Measurement value : RGB value, HSL value ( Hue/Saturation/Luminance ).
* 45° /0° color measuring geometry.
* Used the spectral analysis method to determine the color of the sample
* Complete set included the color probe and the meter, display the measurement value from
* LCD display, show RGB or HSL value at same time.
* Power : 006P DC 9V battery.
* Meter size : 203 x 76 x 38 mm
2 is a portable co
lor analyzer equipped Measurement
RGB value
with an external sensor probe having
a 45° /0° color R ( Red ) value : 0 to 1023.
measuring geometry. The modem, a
ccurate G ( Green ) value : 0 to 1023.
microprocessor technology uses the spec
tral analysis B ( Blue ) value : 0 to 1023.
method to determine th
e color of the sample.
HSL value
Excellent repeatability due to spectro
scopic analysis Hue value : 0 to 1.000.
technique used. Saturation value : 0 to 1.000.
* Friendly operation, just press the oper
ation button will Luminance value : 0 to 1.000.
get the color value ( R, G, B or H, S, L ). Repeatability R (Red) value < 3
* Relative function, can easy to compare the color value G (Green) value < 3
of the different two measuremen
t material. B (Blue) value < 3
* The RGB-1002 is designed mainly
for measuring the Hue value < 0.01
color of no lighting sample such as
textiles, paper, Satu
ration value < 0.01
leathers, painting materials...... It is th
e useful tool for Luminance value < 0.01
the quality control and the wi
de industrial application.
* Repeatability is specified under the
* The color analyzer also can measure the reference
same sample tested 10 times within
lighting sample color value such as CRT, LCD monitor,
two minutes.
LED lamp, lighting lamp.....
* Accuracy is specified under after the
* For no lighting sample co
lor measurement, a defined
instrument is calibrated.
light source illuminates the sample
and the reflected Measurement Type
1 : No lighting sample material :
surface light is spectrometri
cally analyzed. sample Such as
textiles, paper, leathers...
* For lighting sample color measur
ement, the light material Type
2 : Lighting sample material :
source of sample is spectrometrically anal
yzed directly. type Such as CRT, LCD monitor,
* RS232 computer interface, can stor
e the measuring LED
lamp, lighting lamp.....
color value in the computer for recording and the
* The RGB-1002 is designed mainly for
further color analysis.
measuring the color value of type 1 ( no
* Build in CAL ( Calibration ) button, for no lighting
lighting sample ). For the type 2 ( lighting
sample measurement, use the included white color
sample ) color measurement just for the
calibration card to make the self calibration easily.
reference only.
* Hand held housing case, easy to carryout. Buttons OP button ( Operation button )
* Power supply by 006P DC 9V battery or DC
9V adapter. CAL button ( Calibration button )
REL button ( Relative button )
2. APPLICATION
RGB/HSL button
(Select RGB or HSL value )
* To check the color value of textiles,
paper, leathers, Light ON/OFF button
painting materials.
* No lighting sample measurement,
* The objective quality control of color during
select the sensor light to on.
production.
* Lighting sample measurement,
* The color measurement and recording of products
select the sensor light to off.
supplied by supplier to check for conformity Po
wer off Auto shut off saves battery life or
specification. manual off by push button.
* The comparison of color samples against color
* Power will off automatically after
standard.
3 min., if no buttons be pressed.
* The interpretation and statistic evaluati
on of color Low battery Low battery indicator.
sample measurement. Computer
RS 232 PC serial interface.
* To check the reference color value of CRT monitor, interface
LCD monitor, light lamp. Operating 0 to 50 ( 32 to 122 ).
°C°C°F °F
Temperature
3. SPECIFICATIONS
Operating Less than 80% RH.
Display LCD size : 59 mm x 34 mm. Humidity
Measuring 45° /0° - circular illumination at
45° , Power Supply DC 9V battery, Alkaline type
geometry measurement at 0° . 006P
, MN1604(PP3) or equivalent.
Spectral range 400 nm to 700 nm. DC 9V adapter input.
Light source Two white LED lamp.
@ AC/DC power adapter is optional.
Measuring For no lighting sample color Pow
er Current Standby : Approx. DC 6.3 mA.
principle measurement such as textiles,
paper, Measurement : Approx. DC 32 mA.
( 2 SEC.
)
leathers, painting material
s......, a Weight 478 g/ 1.05 LB.
defined light source illuminates the
* Main instrument and the sensor probe
sample and the reflected surface light is Dimension
Main instrument :
203 x 76 x 38 mm
spectrometrically analyzed.
Sensor probe :
160x92x45 mm
* For lighting sample color measurement,
Accessories Instruction manual.......................
.
1 PC.
the light source of sample is
Included Sensor probe ( RGB-1002P ).........
.
1 PC.
spectrometrically analyzed directly.
White color calibration card........... 1 PC.
Color 3 color photo transistors : Carryin
g
case, CA-06....................
.
1 PC.
sensors
Red photo transistor
Optional * AC to DC 9V adapter.
Green photo transistor
Accessories * RS232 cable, UPCB-02.
Blue photo transistor
*USB cable, USB-01.
Calibration Self calibration. *
Data Acquisition software,
* The calibration white calibration card
SW-U801-WIN.
is included.
* Appearance and specifica
tions listed in this broc
hure are subject to change
without notice. 
